P895 Test and Measurement Pressure Transducer
- 0.1% FS Accuracy
- Gage, Differential and Absolute Versions
- Low Temperature Error
- For Liquid or Gas Service
- FS Ranges from 2.22 In H2O
- +/-5 Vdc and 4-20 mA Output Signals
The P895 is ideal for:
- Laboratory Pressure Measurements
- Automotive Test Cells
- Any High Accuracy Application
The P895 is designed for a wide variety of pressure measurements where high resistance to vibration and superior stability through temperature change is required. The zero and full-scale output calibrations are set by the potentiometer adjustments accessible from the top cover.
The P895 is available in three output configurations:
- ·4-20 mA output
- DC output
A true two-wire system which will operate over a supply voltage of 9 to 55 Vdc.
Provides a ± 5 Vdc signal.
An absolute pressure version with a welded variable reluctance sensor is also provided. Zero and span controls are available for external adjustment. Selection of connector or pigtail wiring options.
Videos
Downloads
Our offers
- Rugged DP transmitter
- For liquid or gas service
- 4-20 mA Two-wire, ±5 VDC
- Full Scale Ranges from 2.22 inH2O to 10 KPsi
- Excellent temperature characteristics
- NEMA 4 Housing
- 0.25% standard, 0.1% and 0.05% accuracy options available
- Now available in 316SS and Inconel
- 0.1% FS Accuracy
- CAN Bus Digital Interface
- Gage, Differential and Absolute Versions
- Low Temperature Error
- For Liquid or Gas Service
- FS Ranges from 2.22 In H2O
- ± 5 Vdc Analog Output
- Ranges from as low as ± 0.08 psi FS to ± 3200 psi FS
- Differential or absolute versions
- Extremely rugged construction