Oil & Gas
Oil & Gas Applications
Validyne pressure sensors and pressure transmitters have been used in the Oil & Gas industries for over 50 years.
- Ranges from ±0.08 to ±5000 psid
- Line pressure upto 5000 psig
- Fast dynamic response
- Accepts corrosive liquids and gases, both sides
- High natural frequency
- Field replaceable replacement diaphragms
- Wet-Wet capability
- Full scale range from ±8 psi to ±10,000 psi
- Static line pressures up to 10,000 psi with 3% FS Max. Line Pressure Effect
- Fast dynamic response
- Sensor diaphragms are field replaceable
- High natural frequency
- Low delta P range, high line pressure
- Ranges from ±8.0 to ± 10,000 PSI FS
- Wet-wet capability
- Line pressure to 10,000 psig
- 9-55Vdc Power, ±5Vdc or 4-20mA Output
- Stainless steel pressure cavities
- Now available in Inconel with Teflon Coated Diaphgrams
- RS485 Serial, USB or CanBus Interface for Digital Operation with PC
- FS Ranges from 8 to 10,000 Psid
- Excellent Stability Over Wide Thermal Range
- 0.5% FS Accuracy, 0.7% Max Temperature Error
- For Liquid or Gas Service
- 10,000 Psig Line Pressure Rating
- Compatible with Serial Port Software
- Now available in Inconel with Teflon Coated Diaphgrams
Supporting Oil & Gas Since 1970
We have a variety of pressure sensors that can handle line pressures for 3k, 5k and 10K PSI while measuring a differential pressure of as low as 0.125PSI full scale. The ability to change the full scale pressure range of a Validyne transducer makes it the most flexible choice for research where pressure measurements are constantly changing to meet new requirements.
Applications in the Industry
Read more about common uses for Validyne pressure sensors and data acquisition systems:
Pressure Transmitter to Detect Burner Flame Instability
The FM approved DR800 was developed to be sensitive enough to detect the low heater pressures, yet responsive enough to capture the pressure waveform prior to a flame-out condition.
Petroleum Research
Validyne’s P61 USB pressure transducer is used in a research laboratory to measure the pressure drop across the sample on a micro scale for an ideal slice of rock. The results are then extrapolated to the actual field conditions.
Soil Core Testing
High line pressures that can make low differential measurements are crucial for oil core testing. The rugged Validyne P365 high line pressure transducer has been used at major labs across the industry to make such measurements.
